Same-Day in 100+ Cities 🛡️ 1-Year Labor Warranty ⭐ 4.8 · 1,000+ Reviews
15% OFF First Service NORTECH15
Exterior Cleaning

Professional Driveway & Concrete Cleaning — Pressure Washing & Soft Wash for Every Surface

Oil stains, tire marks, algae, rust, and years of embedded grime don’t belong on your driveway. NorTech’s professional driveway and concrete cleaning service uses the right method for your specific surface — pressure washing for tough hard surfaces, soft washing for decorative or sealed concrete — and leaves every paved surface looking restored.

Certified Professionals
Pressure Wash & Soft Wash
Satisfaction Guarantee
Nationwide Service
Request a Free Quote
First-Time Customer Offer

New to NorTech? Save 15% off your first driveway or concrete cleaning service — any surface type, any size.

Use code NORTECH15 at checkout.
→ Claim Discount
Surfaces We Clean

Driveway & Concrete Cleaning for Every Paved Surface

NorTech cleans all exterior hard surfaces — from standard concrete driveways to decorative pavers, pool decks, and retaining walls. Each surface gets the method it needs.

Concrete Driveways

The most common driveway surface — pressure washed with pre-treatment degreaser for oil stains, hot water for biological growth, and surface cleaning attachments for even results.

Asphalt Driveways

Lower pressure settings protect asphalt integrity while still removing oil, algae, and surface grime. Hot water and degreaser pre-treatment applied for fuel and oil contamination.

Brick & Paver Driveways

Pavers require controlled pressure to avoid dislodging joint sand or damaging the surface. We use soft washing or low-pressure cleaning to preserve joint material and surface finish.

Stamped & Decorative Concrete

Stamped concrete sealers are vulnerable to high pressure. Soft washing is used to clean without stripping the sealer — preserving the texture and color of the decorative finish.

Pool Decks & Patios

Algae, mildew, and calcium deposits on pool surrounds and patios are cleaned with the appropriate method for the surface — concrete, travertine, or composite decking.

Sidewalks & Walkways

High-traffic pedestrian surfaces accumulate mold, algae, and grime that create slip hazards. Pressure washing restores traction and appearance on all walkway materials.

Retaining Walls

Block, stone, and poured concrete retaining walls develop efflorescence, algae, and biological staining. Soft washing removes growth without disrupting mortar or joints.

Garage Floors

Interior and exterior garage floor cleaning with degreaser pre-treatment to break down embedded oil and rubber tire marks before high-pressure washing.

Cleaning Methods

Pressure Washing vs. Soft Washing — How We Choose the Right Method for Your Surface

Not every concrete or paved surface should be pressure washed at full force. NorTech technicians assess your surface type, condition, and finish before selecting the right cleaning approach — or combining both methods for the best result.

Pressure Washing

High-pressure hot water combined with pre-treatment agents. The force of the water does the heavy lifting on hard, unsealed surfaces.

  • Most effective on standard concrete and asphalt
  • Removes embedded oil, rust, and tire marks
  • Fastest method for large surface areas
  • Hot water option breaks down grease faster

Best for: Standard concrete driveways, asphalt, garage floors, sidewalks, and any unsealed hard surface.

Soft Washing

Low-pressure application with biodegradable cleaning solution. The chemistry kills biological growth and lifts staining without mechanical force.

  • Safe for stamped concrete and sealers
  • Preserves paver joint sand and grout lines
  • Kills algae and mold at the root for longer results
  • Ideal for decorative or recently sealed surfaces

Best for: Stamped concrete, pavers, travertine, pool decks, retaining walls, and any sealed or decorative surface.

What We Remove

Types of Driveway & Concrete Staining We Treat

Different stains require different pre-treatments and pressure settings. NorTech technicians identify the stain type before starting to ensure the right approach is applied.

Oil & Grease Stains

Engine oil, transmission fluid, and grease penetrate concrete pores fast. Degreaser pre-treatment breaks the bond before hot water pressure washing flushes it out.

Rust & Mineral Staining

Rust from sprinkler heads, fertilizer, or oxidizing metal leaves orange-brown stains on concrete. Specialist rust treatment applied before cleaning significantly reduces or eliminates discoloration.

Algae, Mold & Mildew

Green or black biological growth on shaded driveways and walkways. Soft wash solution kills the organism at the root — not just the surface layer — for longer-lasting results.

Tire Marks & Rubber Deposits

Hot tire rubber transfers to concrete driveways during braking and acceleration. Degreaser and high-temperature pressure washing break down the rubber deposit effectively.

Efflorescence

White chalky mineral deposits that migrate to the surface of concrete and masonry. Efflorescence treatment and controlled pressure washing remove the deposit without damaging the substrate.

General Grime & Atmospheric Soiling

Dust, pollen, exhaust soot, and airborne particles accumulate on all outdoor surfaces. Annual pressure washing prevents grime from becoming embedded and increasingly difficult to remove.

Pricing Transparency

Driveway & Concrete Cleaning Cost Factors

Driveway and concrete cleaning costs are based on total surface area, surface type, stain severity, and whether pre-treatment is required. Click any factor to learn more.

More square footage means more time, more water, and more solution — this is the primary driver of driveway cleaning costs.
Stamped concrete, pavers, and travertine require lower pressure and more careful application than standard poured concrete.
Heavy oil staining requires degreaser pre-treatment and longer dwell time before pressure washing can fully lift the stain.
Dense algae or mold may require soft wash pre-treatment before pressure washing for complete removal.
Specialist chemical treatments are required before standard cleaning to break down rust and mineral deposits.
Vehicles, planters, or tight access points add setup time before cleaning can begin.
Annual cleaning prevents grime from embedding deeply into the surface, keeping each appointment faster and more cost-effective.

All driveway and concrete cleaning pricing is quoted to your property. Request a free quote — no obligation. Request a free quote — no obligation.

Certified & Insured Every technician, every job
The NorTech Promise Our service guarantee
Right Method Every Time Pressure wash or soft wash — we assess first
4.8-Star Rated 1,000+ verified reviews
Customer Reviews

What Customers Say About Our Driveway & Concrete Cleaning Service

4.8

Based on 1000+ ratings

“There was an oil stain in my driveway from a truck that sat there for two years. I genuinely thought it was permanent. They pre-treated it and pressure washed it and the stain is 95% gone. Blew my mind.”

— Victor H.

“They specifically recommended soft washing for my stamped concrete instead of pressure washing because of the sealer. That kind of knowledge is exactly why you hire professionals. Driveway looks perfect.”

— Patricia W.

“Good job on the driveway overall. The pool deck area had a few spots they missed near the edge of the water line. Not a huge deal but I paid for the full deck so I expected full coverage. They did come back and touch it up.”

— Sandra N.

“My pavers were green with algae on the shaded side of the house. The soft wash they used killed all of it and the whole driveway looks uniform now. Two months later and still no regrowth.”

— Omar A.

“Results on the concrete were great — really clean. One thing I’d flag is they left some runoff water pooled in the flower bed at the edge of the driveway. Wasn’t a big deal but worth mentioning so future customers know to flag it beforehand.”

— Rachel G.

“We had the driveway, sidewalks, and garage floor done in one visit. All three look completely different — the garage floor especially. I didn’t think cleaning could make that much difference on concrete that old.”

— Thomas & Kim B.
Got Questions?

Driveway & Concrete Cleaning — Frequently Asked Questions

The best method depends on what needs to be removed. Oil stains and general grime respond best to hot water pressure washing with a pre-treatment degreaser. Mold, algae, and biological growth are most effectively treated with a soft wash solution that kills the organism at the root before rinsing. NorTech technicians assess each driveway and apply the right method — or a combination — for the specific conditions.
Yes. Professional driveway cleaning with a pre-treatment degreaser and high-pressure hot water can significantly reduce or eliminate oil stains from concrete. Fresh stains respond better than old set-in stains. Very old or deeply embedded oil contamination may require multiple treatments for best results.
Most driveways benefit from professional cleaning once or twice per year. Driveways with heavy vehicle traffic, oil-dripping vehicles, or significant tree coverage may need more frequent cleaning. Annual cleaning prevents biological growth from embedding into the concrete surface and becoming harder to remove over time.
High-pressure washing can damage stamped concrete sealers, dislodge paver sand, and erode grout lines if used incorrectly. NorTech technicians use lower pressure settings for decorative concrete and paver surfaces, and often recommend soft washing as the primary cleaning method to preserve the finish and joint material.
Driveway and concrete cleaning costs depend on the total surface area, the type of surface material, the level of staining or biological growth, and whether pre-treatment is required. Contact NorTech for a free, no-obligation quote based on your specific property.
A standard residential driveway typically takes one to two hours. Larger properties, pool decks, or multi-surface jobs combining driveways, walkways, and patios may take three to four hours or more depending on total area and condition.
NorTech cleans all exterior paved and hard surfaces including concrete driveways, asphalt driveways, brick and paver driveways, sidewalks, walkways, pool decks, patios, retaining walls, parking areas, and concrete garage floors.
Sealing after cleaning is not required but is strongly recommended for concrete and paver surfaces. A freshly cleaned surface provides the best possible bond for sealers and protective coatings. Sealing after professional cleaning extends the time before the next cleaning is needed and protects against future oil penetration and biological growth.
Service Coverage

Driveway & Concrete Cleaning Services Near You

NorTech provides professional driveway and concrete cleaning across the United States. We serve hundreds of cities including:

View our full service territory →
Get Started Today

Let’s Get Your Driveway Looking the Way It Should

Get a free, no-obligation quote for driveway and concrete cleaning. NorTech’s certified technicians assess your surface first and apply the right method every time.

👋 Hi there! Need help? Chat with us!
NorTech
Chat with NorTech
Typically replies within minutes
👋 How can we help?
We typically reply within a few minutes.