Aluminum Wiring & Knob-and-Tube Replacement

Why these wiring types worry inspectors and insurers

Aluminum wire expands and contracts more than copper and can loosen at switches, outlets and breakers, which leads to heat at the connection. Knob-and-tube wiring has no ground wire, was never designed for modern loads and is often buried in insulation or modified by earlier owners. Many insurers ask about both during underwriting, and some refuse coverage or charge more until they are addressed. An electrician can assess the condition and tell you how urgent the work really is.

Rewire, remediate or replace in stages

The cleanest solution is a full rewire with copper, which also lets you add circuits, outlets and grounding. For aluminum, approved connectors and special repair devices are sometimes used at each connection as a lower-cost remediation, though the work must still follow code and manufacturer instructions. Many owners phase the project, starting with the most worn circuits, kitchens and baths, and finishing the rest over time. Walls often need access holes, so ask about patching and painting.

Permits, inspection and living in the house

Rewiring requires a permit and inspection in most cities, and a licensed contractor handles that. Power is shut off circuit by circuit, so you may live in the house during the work with temporary arrangements. Plan around rooms where walls will be opened, and clear furniture and valuables. Insurance agents often accept a final inspection sign-off as proof the work was completed, so keep your permit and sign-off records. Ask the electrician to photograph the old wiring before it is removed, since those images help insurers and future buyers see what was replaced.

Ceiling Fan Installation

New fan, cooler rooms — standard or vaulted ceilings, fully wired with the remote set up.

Switches, Outlets & GFCI

Replace dated switches and outlets, install GFCI and AFCI protection where the code needs it, or…

Light Fixture Replacement

Swap any flush mount, pendant, or chandelier for a clean, secure new fixture.

Recessed Lighting

Bright, even LED can lights added in existing or brand-new spots.

Under-Cabinet & Cabinet Lighting

LED strip or puck lighting under cabinets and inside displays for warm, useful light.

Smart Switches & Dimmers

Lutron, Leviton, Kasa, and GE Enbrighten smart switches and dimmers installed and app-ready.

Bathroom Exhaust Fan

Swap a noisy or weak fan for one vented properly to the exterior — no shortcuts.

Smoke & CO Detector Installation

Code-compliant smoke and carbon monoxide detectors installed or replaced.

Breaker Reset & Outlet Troubleshooting

Tripped breakers, dead outlets, and GFCI faults diagnosed and fixed — no rewiring.