Pool Deck Resurfacing

Why decks wear out and what resurfacing fixes

Concrete cracks as the ground moves, surface coatings fade and chip, and pool water and salt eat away at the finish. A worn deck can be slippery, hot to bare feet and unattractive. Resurfacing can repair cracks, correct small slopes and provide a new, textured surface at much lower cost than replacing the slab. The contractor first checks the slab, its drainage and any signs of settling to see whether a surface treatment is enough. Mention how you use the deck, such as barefoot children, furniture or events, so the contractor can recommend a finish with the right grip and heat control.

Finish choices: texture, stamped overlays and pavers

Cool-deck coatings reflect heat and give a nonslip texture, and they come in many colors. Stamped overlays mimic stone, brick or tile patterns, and pavers offer the most durability and repairability but cost more and need a prepared base. Each choice has its own maintenance needs, from resealing to joint sand replacement. Ask for sample boards in sunlight, since colors look different outdoors, and compare how each performs with salt water. Ask for a small test patch in an inconspicuous area if you are unsure about the texture or the color against your house and pool finish.

Preparation, drainage and curing

Surface prep determines how long the finish lasts. The contractor cleans and grinds the slab, repairs cracks and ensures water drains away from the house and into proper outlets. Coatings need dry weather and cure time before use, and you may need to keep furniture and traffic off for several days. Ask about sealing schedules and cleaning methods, and keep the color code to touch up the deck in the future. Plan outdoor events around the cure time, and keep sprinklers, pets and furniture off the surface until the contractor says it is ready.

Pool Cleaning & Maintenance

Skimming, brushing, vacuuming, filter checks, and chemical balancing on a weekly or biweekly sch…

Pool & Spa Equipment Repair

Pumps and motors, filters, heaters, salt cells, controllers, lights, valves, and leaking fitting…

Pool Opening, Closing & Cover Installation

Open the pool for the season, close it for the off-season, or install a new pool cover for the f…

Green Pool Recovery (Algae Clean-Up)

A green, cloudy, or neglected pool brought back to clear: heavy brushing, vacuuming, shock, filt…

Pool Leak Detection

Find out where a pool or spa is losing water: bucket and dye tests, plumbing pressure tests, and…

Pool Tile & Calcium Cleaning

Calcium and scale removed from the waterline tile and coping with pumice, bead-blast, or hand po…

Pool Drain, Acid Wash & Refill

Drain, scrub, and refill to reset a pool with stained plaster or unbalanceable water. Acid wash…

Pool Resurfacing & Replastering

Replastering and resurfacing of swimming pools by a licensed pool contractor: plaster, quartz, p…

Pool Removal & Fill-In

Licensed demolition and fill-in of an unwanted swimming pool, with permits, drainage, compacted…