Boiler, Radiator & Hydronic Heat Service

The annual tune-up that prevents the cold-night failure

A tune-up begins with a visual check of the boiler, flue and piping for leaks and corrosion, followed by testing the safety controls, the circulator pumps and the pressure and temperature gauges. For gas or oil units, the technician checks combustion, cleans burners or heat exchangers and measures efficiency. Doing this before winter lets you replace worn parts on your schedule, not in an emergency, and a documented tune-up can also help with warranty and insurance questions.

Cold radiators, noisy pipes and uneven heat

The most common cause of a cold radiator is trapped air, which a technician removes by bleeding the radiator or purging the loop. Other causes include stuck valves, failed circulator pumps, closed zone valves, sludge in the system and low water pressure. Banging, ticking and gurgling noises can point to air, scale or loose pipes. By testing each zone in turn, the technician pinpoints the cause and explains the repair, rather than guessing. Mark any radiators that stay cold on a floor plan before the visit, because the pattern often points straight at the failing valve or zone.

Radiant floors, steam systems and when to replace

Radiant floor and steam systems have specific needs, such as mixing valves, manifolds, proper water chemistry and correct venting. If your boiler is old, has frequent repairs or a cracked heat exchanger, replacement may be more economical than continuing to repair. A thoughtful contractor will present both options with rough costs. Modern condensing boilers are more efficient but require proper venting and condensate drainage, and work like that must be permitted and inspected. Ask the technician to note the boiler age, model and installed date in the report, which makes future repair or replacement decisions easier.

HVAC System Replacement

Full furnace/AC system replacement, not a repair — sized, permitted, and installed by a verified…

Ductwork Installation & Repair

New ductwork or repair of existing ducts — always a verified C-20 HVAC contractor.

Mini-Split Installation & Repair

A new ductless mini-split system installed, or an existing one diagnosed and repaired — always a…

Furnace Repair

Furnace not heating, cycling wrong, or making noise — diagnosed and repaired.

AC Repair

AC not cooling, leaking, or tripping the breaker — diagnosed and repaired.

Air Duct Cleaning

A full duct-system cleaning to clear dust, allergens, and debris from your HVAC.

HVAC Maintenance & Tune-Up

For a home: a seasonal tune-up to keep your system running efficiently and catch small problems…

Whole-House Fan Installation

A whole-house fan installed in the attic to pull cool evening air through the home.

Indoor Air & Comfort Upgrades

Comfort and air-quality upgrades installed by a licensed HVAC contractor: zoning, humidifiers, d…